畫冊印刷產品在我們?cè)谌粘Ｉ町?dāng)中經常是可以看到的，那么，在印刷畫冊產品的時候怎樣才可以保證畫冊的質量，讓廣大消費者們所接受呢？今天濟南印刷小編所講的就是溫度對畫冊印刷產品的質量有哪些影響。

Picture album printing products are often seen in our daily life. How can we ensure the quality of picture album products and make them acceptable to consumers when printing picture album products? Today, Jinan printing Xiaobian talked about the impact of temperature on the quality of picture album printing products.

在畫冊印刷產品的過程當中，階調增大，實地密度是可以用三種不同的方法借助印刷紙張來進行判定，而這些印刷紙張是在眾多的紙張當中抽選出來的，所以印刷版面是基本相同的，所以主要是確定印刷紙張標準的偏差以及小值，大值之間的差異范圍。

In the process of producing picture album printing products, the tone increases, and the field density can be determined by three different methods with the help of printing paper. These printing paper are selected from a large number of papers, so the printing layout is basically the same, so it is mainly to determine the standard deviation of printing paper and the difference range between small and large values.

雖然在膠印印刷機械當中傳動機構以及軸承上所產生的熱功率較小，但是由于排出的可能不大，所以會產生膠印機械側面機件出現發熱的情況，在膠印印刷機械沒有保護的情況下，傳動的側部件就會感覺到五十度左右的高溫，這樣對畫冊印刷產品的質量會產生很大的影響，期間油冷卻的具體作用就是可以使印刷機械的側面部件不會過高。

Although the thermal power generated by the transmission mechanism and the bearing in the offset printing machinery is small, it is unlikely to be discharged, so the side parts of the offset printing machinery will generate heat. When the offset printing machinery is not protected, the side parts of the transmission will feel a high temperature of about 50 degrees, which will have a great impact on the quality of the album printing products, The specific function of oil cooling during this period is to prevent the side parts of the printing machine from being too high.

一臺印刷機械的轉動功率可以應用在驅動輸墨的裝置當中，但是在輸墨的裝置當中，印刷油墨在分離的時候，彈性比較大的膠棍碾壓與印刷串墨輯之間的來回串動就會使熱量增加，所以印刷工人們就會設法使用水循環來保持它們之間的恒溫。

The rotational power of a printing machine can be used to drive the inking device, but in the inking device, when the printing ink is separated, the heat will increase due to the rolling of the elastic rubber stick and the back and forth movement between the printing inking series, so the printing workers will try to use water circulation to maintain the constant temperature between them.

以上就是問題的相關解答了，您對此有什么不懂得地方，可以隨時來我們網站http://www.kenkeng.cn進行咨詢了解！

The above is the relevant answer to the question. If you don't know anything about it, you can come to our website at any time http://www.kenkeng.cn Consult and understand!