印刷油墨生產的目的是使顏料顆粒均勻地分散到連結料中，并根據不同種類的油墨及性能要求適當加入輔助劑形成一穩定懸浮膠黏體。

The purpose of printing ink production is to enable pigment particles to be evenly dispersed into the binder, and add auxiliary agents appropriately according to different types of inks and performance requirements to form a stable suspended adhesive.

印刷油墨的制造工藝分為哪些工序？

What are the manufacturing processes of printing ink?

印刷油墨的制造工藝分為準備、配料、攪拌、軋研、檢驗和裝桶等工序，下面濟南印刷廠對此進行一一的分析。

The manufacturing process of printing ink can be divided into preparation, batching, mixing, rolling, inspection, barrel filling and other processes, which will be analyzed one by one by Jinan Printing Factory.

準備

prepare

準備是指油墨廠對生產油墨所需的主要原材料進行加工與制取，主要包括顏料、連結料和填充料的制取。油墨廠購進的原料如顏料等，往往不符合制造油墨的要求，需要進行加工，直到可供制墨為止。

Preparation refers to the processing and preparation of the main raw materials required for the production of ink by the ink factory, mainly including the preparation of pigments, binders and fillers. Raw materials purchased by ink factories, such as pigments, often do not meet the requirements for manufacturing ink and need to be processed until ink can be prepared.

配料

mixed ingredients

配料是把配方中規定的顏料和連結料及輔助劑放入專用的容器中的過程。不同類型的印刷油墨，所用的原材料、生產工藝等往往完全不同，所以要生產某一種油墨，須根據該油墨的配方配料。

Ingredient is the process of putting pigments, binders and auxiliary agents specified in the formula into special containers. Different types of printing inks often use different raw materials, production processes, etc., so to produce a certain kind of ink, ingredients must be prepared according to the formula of the ink.

攪拌

stir

攪拌是利用機械的作用使顏料固體粉末與連結料混合，促進連結料從某一方向進入顏料的間隙和毛細孔間隙，潤濕而排除顏料周圍的空氣和水分，達到粗分散的目的。

Stirring is to mix solid pigment powder with binder by mechanical action, promote binder to enter the pigment gap and pore gap from a certain direction, wet and remove the air and water around the pigment, so as to achieve coarse dispersion.

研磨

grind

研磨，俗稱軋墨，是利用機械的方法將顏料加工成原始粒子分散于連結料中，使油墨形成穩定懸浮分散體的一大關鍵。但研磨只能把顏料的聚集體打散并被連結料潤濕，而不能把顏料粉碎到小于顏料的原始粒子。

Grinding, commonly known as ink rolling, is a key to use mechanical methods to process pigments into original particles and disperse them in binders, so that ink can form a stable suspended dispersion. However, grinding can only break up the aggregate of pigment and wet it with binder, and cannot crush the pigment to original particles smaller than the pigment.

印刷油墨的制造工藝分為哪些工序？這里先從四個過程來講解問題的內容，希望給您好的幫助，當然您還有疑惑可以隨時聯系我們http://www.kenkeng.cn了解！

What are the manufacturing processes of printing ink? Here we will explain the content of the problem from four processes, and hope to give you some help. Of course, you can contact us at any time if you have any doubts http://www.kenkeng.cn Understand!